Senzor The 2450 Pressure Sensor has a one-piece injection molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids. Three pressure versions allow for optimal resolution matched to your sensing needs. Solid state circuitry eliminates drift (no internal potentiometers). These sensors are available with a proprietary digital (S3L) output, or field-scaleable 4 to 20 mA output. Dual-threaded ends allow in-line installation with conduit connection, or add the integral adapters to create a compact assembly with a field mount version of the Signet 8250 Level, 8450 Pressure Transmitter or the 9900 Transmitter. Measurement range: Operating Temperature:**  15° to 85°C (5° to 185°F) Operating Pressures:** -XU Ultra Low: 0 to 0.7 bar (0 to 10 psi) -XL Low: 0 to 3.4 bar (0 to 50 psi) -XH High: 0 to 17 bar (0 to 250 psi) Compatibility: 8900, 9900 and 9950 2260 Level Transmitter The type 2260 is a rugged, high performance ultrasonic level measurement transmitter, having transducer and processing electronics and a display/programming unit incorporated in one single housing. All type 2260 Level Transmitters are using established high end pulse echo transducers, which provide narrow beam angles and reliable measurement ranges up to a distance of 15 meters. For small, stand alone tanks the transmitter provides a simple 2-wire 4 to 20 mA output, with additional power relay contacts. It can be programmed using push buttons and the large, graphic display. For large and/or multiple tank applications versions with HART interface are recommended, communicating directly with a panel mount controller or PLC. The HART protocol can easily be used for programming these versions. Principle: non-contact ultrasonic transit time Measuring range: 0.2…4 m, 0.25…6 m, 0.45…15 m Sensor Type: PP or PVDF Output: 4-20 mA, 2-wire Integrated display and programming buttons Supply power: 12…36 V DC Fisa Tehnica Senzor.pdf Fisa Tehnica Transmitter.pdf